Unlock HTC Touch

Here are the steps to unlock HTC Touch for any network :

  •  Copy ‘Cert_SPCS.cab‘ on your phone & install (run).
  •  Copy ‘EnableRapi.cab‘ on your phone & install (run).
  • Connect Your HTC with PC
  • Establish an Activesync connection with your phone.
  • Unzip the zip file & Run “Unlock_Touch.exe”on your PC. (Make sure the ActiveSync connection is still running)
  • File “unlock_code.txt” thus generated will have your unlock code( Eight-digit number).Ignore any other digits if generated.

 You can download the file from here:
 

Similar Posts

  • Mobile Tech Glossary L to O

    – LAN (Local Area Network) – A group of interconnected computer terminals or nodes, often co-located and managed from a single point as a single network. An example is a company’s internal information sharing and managing system…. – latency – From a mobile phone perspective, latency generally refers to the time that passes between when…

  • Sharp Secret Codes

    *01763*8371# (*01763*VER0#) — Firmware Version. *01763*3641# (*01763*ENG1#) — Enable Engineer Mode hold pwr key to leave then disable. *01763*3640# (*01763*ENG0#) — Disable Engineer Mode. *01763*8781# (*01763*TST1#) — Test #1 (test early wdt looping to dump, need to remove battery from phone) *01763*8782# (*01763*TST2#) — Test #2 (test irq dis looping to switch, resets itself) *01763*8783#…

  • CDMA Phones Secret Codes

    Nokia: 5185/6185 programming: *3001#12345# Software version: *#837# or *#VER# or *#9999# Serial / ESN: *#92772689# or *#WARRANTY# Phone reset: *#75681# or *#75682# Nokia 6185-5170 1. Press *#639# 2. Enter OTKSL and press OK 3. Enter the MIN and select OK 4. Enter the SID and select OK 5. Programming is complete Nokia 3585 1. Enter…

Leave a Reply

Your email address will not be published. Required fields are marked *